Base-Square-Black_Bollard-4.5inX60in.png

Base-Square-Black_Weighted_Bollard-6in_Reserved-Parking.png

Base-Square-Black_Weighted_Bollard-4.5inX60in.png

Parking Lot Safety

Portable Bollard Bases

Product Description

Our RubberForm Bollard Base Systems are effective traffic deterrents, barriers, and guides. Based on our portable sign bases, they’re light enough to roll and roll to relocate when your needs change in your parking lot or curbside pickup. But they’re heavy enough to withstand winds without tipping over.

Our bollard bases are made with 100% American recycled tire rubber so durable it won’t crack, crumble, or corrode no matter the heat, cold, rain, ice, or snow.

Models

Clear

Add to quote

Specifications:

Base: 18″D X 14″H
Bollard sleeves on the base: up to 72” high
Total weight: 98 lbs per bollard base system
Bollard colors:
- yellow
- red
- blue
- black
- green
- custom colors
Includes 2 wide reflective stripes – various color stripes
Impact and weather resistant – will not warp, chip, crack, spall or corrode
Base Made in the USA with 100% American recycled rubber

Download Spec Sheet

Download

Product Description

Portable Bollards are used to keep pedestrians safe and vehicles out of hazardous areas by acting as deterrents, barriers, or guides. More visible and taller than road cones and short delineator post. But traditional concrete bollards aren’t portable, and plastic bollards from the other guys are so flimsy a gentle breeze could lay them out.

Our RubberForm Portable Bollard Bases are carefully innovated with a low center of gravity so they’re harder to tip over. But they’re not hard to tip-n-roll when you need to relocate them. When you’re growing, plans and parking lots change. You need bollard bases that move when you want them to and never when you don’t.

Our bollard bases are made with 100% American recycled tire rubber that will last decades with no cracking, crumbling, or corroding and the bollards are blow-molded with two wide reflective stripes. They won’t melt in the searing summer sun or warp in the biting cold of North American winters.

Simplify your project by adding our recycled plastic bollards to your quote. Clean up our shared backyard and get both bollards and bases in the same order.

Models

RF-PBBS4.5.52-YLW

4.5”W x 52”H Bollard Post Assembly
Safety yellow bollard with 2 wide reflective stripes

RF-PBBS4.5.52-SPC

4.5”W x 52”H Bollard Post Assembly
Special color bollard with 2 wide reflective stripes

RF-PBBS4.5.60-YLW

4.5”W x 60”H Bollard Post Assembly
Safety yellow bollard with 2 wide reflective stripes

RF-PBBS4.5.60-SPC

4.5”W x 60”H Bollard Post Assembly
Safety yellow bollard with 2 wide reflective stripes

RF-PBBS7.60-YLW

7”W x 60”H Bollard Post Assembly
Safety yellow bollard with 2 wide reflective stripes

RF-PBBS7.60-SPC

7”W x 60”H Bollard Post Assembly
Special color bollard with 2 wide reflective stripes

RF-PBBS7.60.8-YLW

7”W x 60”H Bollard Post Assembly
Safety yellow bollard with 2 reflective stripes and 8-foot post for 12” x 18” sign

RF-PBBS7.60.8-SPC

7”W x 60”H Bollard Post Assembly
Special color bollard with 2 reflective stripes and 8-foot post for 12” x 18” sign

Key Features

Aerodynamic design – low center of gravity withstands strong winds
Enhances safety and minimizes liability
Supports any sign up to 24”
Portable and easy to install – just tip and roll
Made in the USA with 100% American recycled rubber
Impact and weather resistant – will not warp, chip, crack, spall or corrode

Hardware Kits

RF-SBWTHWK

Sign Base Weight Hardware
4 – 6” rugged structural screws
4 – 3/8” x 1-1/2” fender washers

RF-SBMC-SM

Sign base mover with closet hanger hole – 6” hard rubber wheels

RF-SBMC-LG

Large Cart for added base weight – 2 wheeled aluminum hand truck with custom lift plate

FROM ONE SPECIALIST TO ANOTHER

Related products

Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm specializes in safety and risk mitigation.

Recycled Aluminum Signs

Our RubberForm Recycled Aluminum Signs are one step toward the best-looking parking lot for miles around, especially when used with...

Learn More

Add to quote

Portable Electric Cable Support Tower

Our RubberForm Portable Electric Cable Support Towers (PECSTs or Cord Trees), safely keep electric cables off the ground and away...

Learn More

Add to quote

Portable Sign Bases

RubberForm Portable Sign Bases are made for use with a round signpost, sign pole, or square perforated metal signpost (or...

Learn More Choose Options

FREQUENTLY ASKED

How much do your portable sign bases weigh?

72 pounds, with a low center of gravity for added stability. We also have a 75-pound base weight for high wind areas with larger signs.

How portable are your sign bases?

Simply just tip on its bottom side edge and roll the round base into position. Grab the top of the side post and place you hand halfway down the signpost and push into position. If you need a cart to move, we have two size sign base carts, for our 72-pound sign base and our 150-pound sign base post system.

How do I lift or move your sign base?

You can either tip-and-roll into position, or if you need an easier way to move around, we offer a sign base mover cart for longer distances. We have 2 sizes available – one for our standard 72-pound sign base and one for our additional 75-pound sign base weight, for a total weight of 150 pounds.

I’m in a high-wind area and I need a heavier sign base. Do you have a base that weighs more than 72 pounds?

Yes, we have an add-on sign base weight that will add 75 pounds to our sign base, for a total of more than 145 pounds. It also creates a wider base, making it less likely to tip.

Does your sign base come in colors?

We offer thermoformed plastic safety yellow, or handicap blue covers that snap on top of the sign base for higher visibility. The plastic covers can be ordered in custom colors, however, require a minimum quantity order.

What size signposts does your sign base support? Can I use round, square or U-Channel signposts?

We have 3 signpost hole sizes. They can be ordered with a square hole to accommodate a 1-¾” square perforated or smooth, square post with drilled holes. The square hole base will accommodate a U-channel post as well. We can also custom-fabricate square tubes to any configuration and powder coat any color. We also have sign bases with a round post holes to accommodate a 2-⅜” round Schedule 40 plastic post or aluminum post and a 1-⅔” round post. The round plastic 2-⅜” post is our most-popular signpost base.

What post height do you recommend for your 72-pound sign base?

We generally recommend a 5’ signpost for our sign bases. This cuts down on the wind shear that might tip the sign base over in higher wind areas. If you require a taller post, please order our 75-pound sign base weight that attaches to the bottom of our 72-pound sign base. This added sign base weight will enable you to go up to the MUTCD height of 7’ to 8’, use a metal post for this application as plastic may bend in the wind. Please check with your local sign ordinances for the regulations and or sign code requirements.

What is the minimum quantity I can order?

Just one sign base. We can ship out via FedEx or UPS ground to any location or up to 20 sign bases per pallet via common carrier – LTL.

What is the turnaround time to ship your sign base?

Our sign bases are generally in stock and can be shipped out the following business day. Larger orders (greater than 100 sign bases) may take a little longer.

How many sign bases fit on a pallet?

We can ship up to 20 sign bases per pallet via common carrier – LTL.

Why is the RubberForm sign base better than the octagonal sign bases I’ve seen other places?

Most of these sign bases are imported, from China and Quebec Canada (Canada subsidizes their tire recycling and product manufacturing program as much as 50% subsidy). Our sign base is made in our plant in the USA, New York State. We’ve had these octagonal sign bases tested by national sign companies, and they told us the RubberForm sign base is much more stable in high winds due to its low center of gravity design. Side-by-side comparison tests done by our customers have shown RubberForm sign bases winning indisputably.