- Parking Lot Safety
- Public Sector
SH-36″ Speed Hump
Product Description
Our RubberForm Speed Humps are effective permanent or temporary traffic calming devices. Speed Humps are gentler than speed bumps, so they create less noise, are less likely to damage vehicles, and also slow traffic down a little less than speed bumps would.
Our 100% American recycled thermoplastic Speed Humps are easy to install and just as simple to remove and relocate. They can be linked to span any width of road or parking lot. And they’re so durable, they won’t crack, crumble, or corrode in any heat, cold, rain, ice, or snow. And of course, they’ll withstand heavy vehicle traffic.
Specifications:
- Modular design for custom sizing
- Each module measures 24” in length and 2.55″ in height
- Available in 36″ width
- Permanent or temporary speed zone – slow down speed from 15 to 20 mph or below
- Embedded thermoplastic reflective material for low-light conditions
- Made in the USA with 100% American recycled thermoplastic
Product Description
Most traffic calming methods are awfully inconvenient. They’re loud, can damage vehicles, are difficult to install, require demolition to remove, and the concrete or asphalt they’re made of chips, cracks, and crumbles into uselessness over time.
Our RubberForm Speed Humps are blessedly convenient. They’re easy to install: no large work crews, no heavy equipment, no road closures. They’re also just as simple to remove and relocate. That means you can use them for temporary traffic calming, or keep them in place permanently.
Our speed humps are gentler than speed bumps, perfect for roads or parking lots that only require a little calming. They won’t damage vehicles and don’t create much noise or disruption. Our speed humps are fully modular, which means you can link them together to span any width of road or parking lot. They’ve even got reflective material for visibility at night, in fog, or other low-visibility conditions.
We innovate every day to improve our speed humps, which is why they have special tapered end caps that minimize the possibility of pedestrians tripping and allow vehicles crossing the hump to maintain their wheel direction without the “drop-off” and sudden jerk that often accompany steeper graded traffic calming devices. We think it looks pretty snappy too, which is not something you hear much about anything associated with road safety.
Our 100% American recycled thermoplastic humps will last for decades without chipping, warping, or spalling. They can withstand all the searing heat of the summer sun and the frigid cold of North American winters. They can withstand the heavy impact of vehicle traffic and all the rain, ice, and snow seen on American roads
In addition to these speed humps, we also offer Rubber Speed Cushions.
Models
RF-SH36C
- 26 lbs
- 36″W x 24″L x 2.55″H
- Speed Hump Center Module
- Additional center modules can be added for custom lengths
RF-SH36E
- 22 lbs
- 36″W x 24″L x 2.55″H
- Speed Hump End Module
Key Features
- Easy to deploy, install, and recover
- Embedded thermoplastic reflective material for low-light conditions
- Permanent or temporary speed zone – slow down speed from 15 to 20 mph or below
- Conforms to road curvature & any asphalt or concrete surface
- Additional center modules can be added for custom lengths
- Made in the USA with 100% American recycled thermoplastic
Hardware Kits
RF-SH36HWK
- Hardware Kit for 36 inch Speed Hump
- 4 – Lag Bolts: 3/8”W x 5”L
- 4 – Washers: 3/8”W x 1”L
- 4 – Plastic Lag Anchors
- 1 – Dual Connector
FROM ONE SPECIALIST TO ANOTHER
Related products
Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm specializes in safety and risk mitigation.
