• Parking Lot Safety

Bollard Covers

Product Description

RubberForm Plastic Bollard Covers are one step toward the best-looking parking lot for miles around. They take the bleak industrial look of concrete-filled and steel bollard posts and make them look fresh and new when you slide on RubberForm’s Bollard Sleeve.

Choose a cover that complements your company colors for an excellent branded customer experience from parking to purchase. Our bollard covers are easy to install and just as simple to replace as they age and get marred from vehicle hits.

Add to quote

Specifications:

Bollard Post Sizes

  • 4″ Diameter (4.700″ ID) x 52″ Long
  • 4″ Diameter (4.700″ ID) x 60″ Long
  • 4″ Diameter (4.700″ ID) x 64″ Long
  • 7” Diameter (7.125” ID) x 52” Long
  • 7” Diameter (7.125” ID) x 60” Long
  • 7” Diameter (7.125” ID) x 72” Long

Post Diameter Measures = Bollard Post Cover Needed

  • Fits 4” nominal steel pipe, all schedules (4.500” pipe O.D.)
  • Fits 6” nominal steel pipe, all schedules (6.625” pipe O.D.)

Bollard Post Cover Colors

  • Yellow with your choice of stripe colors
  • Red with your choice of stripe colors
  • Blue with your choice of stripe colors
  • Black with your choice of stripe colors
  • Green with your choice of stripe colors

Download Spec Sheet

Download

Product Description

Steel post and concrete bollards are an often-necessary part of parking lot or facility safety. But their natural look is bland and ugly, inconsistent installation means they’re often slightly different heights, and they will rust, crack, and crumble over time, looking even uglier.

RubberForm Plastic Bollard Covers look great, can complement your brand colors, and provide a uniform height to otherwise inconsistent bollard posts. We guarantee them for at least 5 years without cracking, warping, or spalling in any weather conditions: heat, cold, rain, ice, or snow.

Our Bollard Covers are so easy to install your grandparents could do it, and just as easy to remove and replace years later when your parking lot or road needs a little refresh. And Bollard Covers protect and prolong the life of the bollard post underneath too!

Our Bollard Covers are in-stock and ready to ship straight from our factory shelves. When measuring steel bollard posts for covers, we recommend adding 2-4 inches to accommodate inconsistent installation.

Models

RF-SB10E

  • SB-10 Speed Bump End Module
  • Two – Thermoplastic Safety yellow or white arrows
  • 4.1 lbs
  • 24″L x 10″W x 2-1/4″H

RF-SB10C

  • SB-10 Speed Bump Center Module
  • Two – Thermoplastic Safety yellow or white arrows
  • 5.75 lbs
  • 24″L x 10″W x 2-1/4″H

Key Features

  • Manufactured using a 1/8″ thick High Density Polyethylene (HDPE) with stronger intermolecular forces, tensile strength and solvent resistance
  • Contains ultraviolet and antistatic additives that withstand extreme temperatures and resist fading
  • Quick, easy installation and secure fit
  • Durable, flexible plastic designed to absorb impact
  • Protects both vehicles and structures from expensive damage
  • Two large, 2” recessed reflective stripes increase visibility and safety
  • Attractive – Low Cost

Hardware Kits

RF-SB10HWK – included with every section

  • 4 – Hex Lag Screws – Steel: 1/2”W x 4”L
  • 4 – Plastic Shield for Lag Screw: 3″L x 5/8″W
  • 4 – Flat Washers: 1/2”W x 1-1/16”L
  • 1 – Dual Flange Connector

FROM ONE SPECIALIST TO ANOTHER

Related products

Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm specializes in safety and risk mitigation.

Portable Bollard Bases
Portable Bollard Bases
Our RubberForm Bollard Base Systems are effective traffic deterrents, barriers, and guides. Based on our portable sign bases, they’re light...
Learn More
Add to quote
Round Plastic Sign Post
Round Plastic Sign Post
Our RubberForm Round Plastic Sign Posts (also known as sign poles) are a friendly alternative to aluminum or square steel...
Learn More Choose Options

FREQUENTLY ASKED

How much do your portable sign bases weigh?

72 pounds, with a low center of gravity for added stability. We also have a 75-pound base weight for high wind areas with larger signs.

How portable are your sign bases?

Simply just tip on its bottom side edge and roll the round base into position. Grab the top of the side post and place you hand halfway down the signpost and push into position. If you need a cart to move, we have two size sign base carts, for our 72-pound sign base and our 150-pound sign base post system.

How do I lift or move your sign base?

You can either tip-and-roll into position, or if you need an easier way to move around, we offer a sign base mover cart for longer distances. We have 2 sizes available – one for our standard 72-pound sign base and one for our additional 75-pound sign base weight, for a total weight of 150 pounds.

I’m in a high-wind area and I need a heavier sign base. Do you have a base that weighs more than 72 pounds?

Yes, we have an add-on sign base weight that will add 75 pounds to our sign base, for a total of more than 145 pounds. It also creates a wider base, making it less likely to tip.

Does your sign base come in colors?

We offer thermoformed plastic safety yellow, or handicap blue covers that snap on top of the sign base for higher visibility. The plastic covers can be ordered in custom colors, however, require a minimum quantity order.

What size signposts does your sign base support? Can I use round, square or U-Channel signposts?

We have 3 signpost hole sizes. They can be ordered with a square hole to accommodate a 1-¾” square perforated or smooth, square post with drilled holes. The square hole base will accommodate a U-channel post as well. We can also custom-fabricate square tubes to any configuration and powder coat any color. We also have sign bases with a round post holes to accommodate a 2-⅜” round Schedule 40 plastic post or aluminum post and a 1-⅔” round post. The round plastic 2-⅜” post is our most-popular signpost base.

What post height do you recommend for your 72-pound sign base?

We generally recommend a 5’ signpost for our sign bases. This cuts down on the wind shear that might tip the sign base over in higher wind areas. If you require a taller post, please order our 75-pound sign base weight that attaches to the bottom of our 72-pound sign base. This added sign base weight will enable you to go up to the MUTCD height of 7’ to 8’, use a metal post for this application as plastic may bend in the wind. Please check with your local sign ordinances for the regulations and or sign code requirements.

What is the minimum quantity I can order?

Just one sign base. We can ship out via FedEx or UPS ground to any location or up to 20 sign bases per pallet via common carrier – LTL.

What is the turnaround time to ship your sign base?

Our sign bases are generally in stock and can be shipped out the following business day. Larger orders (greater than 100 sign bases) may take a little longer.

How many sign bases fit on a pallet?

We can ship up to 20 sign bases per pallet via common carrier – LTL.

Why is the RubberForm sign base better than the octagonal sign bases I’ve seen other places?

Most of these sign bases are imported, from China and Quebec Canada (Canada subsidizes their tire recycling and product manufacturing program as much as 50% subsidy). Our sign base is made in our plant in the USA, New York State. We’ve had these octagonal sign bases tested by national sign companies, and they told us the RubberForm sign base is much more stable in high winds due to its low center of gravity design. Side-by-side comparison tests done by our customers have shown RubberForm sign bases winning indisputably.