- Industrial
Rooftop Rubber Support System
Product Description
RubberForm’s Rooftop Support Blocks let you safely mount solar PV systems, HVAC equipment, piping, conduits, ducts, and more using strut systems or pipe hangers on your roof.
Our 100% American recycled composite material support blocks can last decades without cracking, crumbling, or corroding, no matter the heat, cold, rain, ice, or wind. They’re simple to install, just as easy to remove and relocate, and won’t damage your roof membrane or inhibit water drainage.
Specifications:
- 3.70 lbs 5 ½”W x 10 ¾” x 4″H
- Rubber roof blocks are available with or without strut
- *Check for strut availability
- Made in the USA with 100% recycled composite material
Product Description
There are many ways of mounting equipment on your flat roof. Until now, each method had severe drawbacks. Wood warps, rots, and absorbs water. Crumb rubber molded blocks don’t last and crumble overtime. Concrete cracks, chips, and spalls. Metal rusts and is conductive to lighting strikes–not something you want on your roof.
Our RubberForm Rooftop Support Blocks outperform and outlast all alternatives, (we know, because we tried them). We worked with major strut manufacturers to carefully innovate our support blocks to secure your rooftop equipment without damaging your roof membrane. That means no sharp or abrasive edges. Installation, removal, and relocation are simple. Our rooftop support blocks are adaptable: attach support struts and pipe straps as needed, or use the blocks to dampen vibration. And they have built-in channels underneath for easy water drainage.
Our 100% American recycled, injection molded TPO composite material can endure all the fury of the elements a rooftop is exposed to: heat, cold, wind, rain, ice, and snow. No chipping, warping, or spalling. And of course, they can bear the weight of heavy equipment long-term.
Models
RF-RTRB
- Support Block without strut
- 3.70 lbs
- 4”H x 5-1/2”W x 10.75”L
RF-RTRBST *Check for strut availability
- Support Block with strut
- 4.10 lbs
- 4”H x 5-1/2”W x 10.75”L
Key Features
- Easy to install
- Available with or without metal strut
- Will not chip, crack, crumble, or spall
- Resistant to extreme temperature variations, UV light, and moisture
- Made in the USA with 100% recycled, injection molded composite material
Hardware Kits
Strut Mounting Hardware *check for availability
- Pipe Hangers
- Pipe Supports
- Conduit Supports
- Roller Pipe Supports
- Roller Mounted Pipe Supports
- Strut Bridge Pipe Supports
- Raised Bridge Pipe Supports
FROM ONE SPECIALIST TO ANOTHER
Related products
Whether you need speed bumps, roofing support, curb ramps, or more, RubberForm specializes in safety and risk mitigation.
